Instructions for iheadbones Bluetooth headset ihb series 501
How to wear iheadbones Bluetooth headset ihb series 501
The speaker should be worn in front of the ear, high on the cheekbone NOT covering or on the ear
How to connect to Bluetooth device
- Switch the headset power ON
- Blue LED on headset will flash quickly while connecting
- Find the Bluetooth Connect screen on your device
- Connect to iHeadBones
- Blue LED will flash slowly when connected
- It will announce “Connected” when the Bluetooth is connected to your device
- Range for Bluetooth is 10 Meters (or 33 Feet)
- If headset does not connect turn headset off and on and it will try to connect again
Charging your headset
- Headset is charged with USB cable and USB Power Cube enclosed
- USB cable can also be connected to any USB port for charging but it may take longer
- When charging Red LED will be on – when charging is complete Blue LED will come on
- Full charge will take approx 2 hours
- Do not use headset while charging
Using button controls
| Function | Button Control | Audible Tone |
| Power On | Power Switch | “Power On” |
| Power Off | Power Switch | “Power Off” |
| Low Battery | Red LED Blinking | “Low Battery” |
| Bluetooth Connected | Blue LED Slow Blink | “Connected” |
| Incoming Call | Ring Tone | |
| Answer Call | Call Button on Left Earpiece | Beep Tone |
| Reject Call | Press and Hold Call Button While Ringing | Beep Tone |
| Transfer Call to Mobile Phone | Press and Hold Call Button | Beep Tone |
| End Call | Press Call Button | Beep Tone |
| Play / Pause Music | Press Music Button on Earpiece | Music Stops / Starts |
| Previous or Next Song | Press and Hold Volume + or – | Music Stops / Starts |
LED indicator
Flashing Red – low power
- Solid Red – charging
- Quick Flashing Blue – bluetooth pairing
- Slow Flashing Blue – bluetooth connected
- Blue Flashing Very Quickly – incoming call